You can get morse blanks then either slot it and add grubscrews as in the commercial flycutters (you can use a rectangular shank tool) or a round hole and get either bits of HSS (drill shaft) or carbon steel and harden and temper
the one in this video is ordinary steel with a parallel shank in a morse collet in the spindle and a hardened piece of carbon steel for the cutter about 25 mm dia to giv you scale (can measure right now Im a mile up the road) http://www.youtube.com/watch?v=HAtziCsUj5Q Dave Caroline ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
