2009/6/6 Erik Christiansen <[email protected]>: > Or, if those ballscrews do wear out overnight unless aligned with > super-duper accuracy,
Combining two threads on this issue: I suspect that as long as there is some "give" in the mounting arrangement before you tighten it all up then the ballscrew and nut will align themselves into a happy arrangement. Also, if that 10E-4 alignment number is radians then that equates to having the end bearings aligned to within 8 thou at the end of a 3 foot screw. (or 0.2mm on the end of a 1m screw) which isn't too extreme. -- atp ------------------------------------------------------------------------------ OpenSolaris 2009.06 is a cutting edge operating system for enterprises looking to deploy the next generation of Solaris that includes the latest innovations from Sun and the OpenSource community. Download a copy and enjoy capabilities such as Networking, Storage and Virtualization. Go to: http://p.sf.net/sfu/opensolaris-get _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
