Chris, Custom drive selected in stepconf. Drives are from Motion Control Products in UK, minimum pulse width 2.5us, direction hold/set time of 5us minimum. Regards Andy ----- Original Message ----- From: "Chris Morley" <chrisinnana...@hotmail.com> To: "EMC" <emc-users@lists.sourceforge.net> Sent: Wednesday, June 10, 2009 1:45 AM Subject: Re: [Emc-users] EMC2.3 and Stepgen tuning
> > > > >> > .ini file base period was set to 100000ns rather than the wizard >> > recommend >> > value. >> > .hal file contained large values for dirhold dirsetup (66000 and 36000, >> > I >> > guess these still equate to 1 base period if base period is set to >> > 100000?) >> > .hal file had values of 1 and 0 set for steplen and stepspace (also >> > evaluates to 1 base period?) >> > .hal parport.<pin>.reset-time set to 2500ns (drive requirement is >> > 2500ns >> > for a minimum pulse width) does reset-time relate to pulse length or is >> > it >> > steplen - I'm confused. > > What did you choose in stepconf? did you put custom values or pick a drive > name? > > Chris M > > _________________________________________________________________ > We are your photos. Share us now with Windows Live Photos. > http://go.microsoft.com/?linkid=9666047 > ------------------------------------------------------------------------------ > Crystal Reports - New Free Runtime and 30 Day Trial > Check out the new simplified licensing option that enables unlimited > royalty-free distribution of the report engine for externally facing > server and web deployment. > http://p.sf.net/sfu/businessobjects > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
