It seems clear to me that the described behavior is a bug. You should file a bug report.
Ken Rainer Schmidt wrote: > On Fri, Jun 12, 2009 at 6:24 PM, Shabbir Hussain<s_hussai...@yahoo.com> wrote: >> G0 should not be used for cutting. It is only for positioning when the tool >> is at safe Z height (out of workpiece and clamps etc.). I have worked with >> Fanuc and Siemens controllers. In these controllers when G0 move is >> programmed, all the axis used in G0 move starts moving at rapid feeds (set >> in the parameters of the controller) and the axis that achieve the position >> just stops and others continue to run. So G0 move produces a non-linear >> move. This is normal behaviour. >> >> So G0 move should finally achieve the target position not the linear path. >> That is why it must be used for positioning. >> >> Thanks >> >> Shabbir Hussain > > Would > G0Z10 > G0X5Y8 > Posiiton Z first and then x and y? I did not spend to much thought > about this and find this thread potentially disaster avoiding... > Rainer > > ------------------------------------------------------------------------------ > Crystal Reports - New Free Runtime and 30 Day Trial > Check out the new simplified licensing option that enables unlimited > royalty-free distribution of the report engine for externally facing > server and web deployment. > http://p.sf.net/sfu/businessobjects > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- Kenneth Lerman Mark Kenny Products Company, LLC 55 Main Street Newtown, CT 06470 888-ISO-SEVO 203-426-7166 ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
