Kim Mortensen wrote: >The leads woing to the coild should definately read far less than 80kOhm.. >imagine you just want 1 Amp in that coil, you would have to have the voltage >on the leads of 80.000 volts.. > >It should be below 1 ohm I would assume. > >To accurately measure ohm at that magnitude, you do it by applywing a >voltage, and measuring the current, and then calculate the resistance.. and >im not talking about applying 220V ac, just whatever your transfpormator can >do DC wise. > > The original post said that he got 0 ohms for each coil, but that he got 80k between coils. This is in the range I would expect if I were holding the test leads to the stepper wires with my fingers. That's why I asked about how he was testing resistance.
- Steve ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
