>> > The original post said that he got 0 ohms for each coil, but that he got > 80k between coils. This is in the range I would expect if I were > holding the test leads to the stepper wires with my fingers. That's why > I asked about how he was testing resistance. > I guess I measured my own inner resistance 8).
The motors were to weak yesterday (WAY to weak) and I thought there might be something wrong. Today I found out that my friend used the wrong (wrong multiplicator color) resistor to set up the current regulator for the stepper drive. Quickly changes it turned out that all is golden. I did not think about my own resistance.... According my my wife it should be beyond a terra ohm.... lol. A good reminder to grab a pair of test clips and use those... dohhhh. Specially when god plenty.... (rolling eyes...). Thanks! Rainer PS:Those are 1220 Oz/In steppers from Kelling with a rubber gasket int he front and a nice splash proof cover in the back. They come with about 8ft of 1/4 inch thick silicon plastic cable with a great internal shield. Webbed not foil. Real nice. All for $150... nice. ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
