On Mon, 2010-01-18 at 22:01 -0600, Jon Elson wrote: > dave wrote: > > Hi all, > > > > Backround: at fest '08 I bought a panasonic ( MSMA ) driver and ac servo > > ( 40W ) from Steve White. > > > > Finally, I'm getting around to trying it. Hooked it up as per the online > > docs. ~150 pgs of .pdf > > > > So far I've connected 110 power to terminals 1 (blk), 3, (white), and > > gnd (green terminal). Also 1 is tied to r and 3 is tied to t. > > > > Servo motor is tied to U, V, W and ground and the encoder cable is in > > place. > > > > Problem: no response. ie. the unit does not appear to fire up at all. > > No display, no response to 'set' or 'mode'. > > > > Any experience, recommendations or ideas would be appreciated. > > > The Yaskawa drives I worked with needed a 24 V enable signal into an > opto-coupled > input to enable the drive. I'll bet these Panasonic drives were aimed > directly at current > Yaskawa customers, and may follow their protocols pretty closely. I'm a > little surprised > there's no display, though. > > Jon >
Thanks Jon, Back to the drawing board. Dave > ------------------------------------------------------------------------------ > Throughout its 18-year history, RSA Conference consistently attracts the > world's best and brightest in the field, creating opportunities for Conference > attendees to learn about information security's most important issues through > interactions with peers, luminaries and emerging and established companies. > http://p.sf.net/sfu/rsaconf-dev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Throughout its 18-year history, RSA Conference consistently attracts the world's best and brightest in the field, creating opportunities for Conference attendees to learn about information security's most important issues through interactions with peers, luminaries and emerging and established companies. http://p.sf.net/sfu/rsaconf-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
