----- Original Message ----- From: "Slavko Kocjancic" <[email protected]> To: "Enhanced Machine Controller (EMC)" <[email protected]> Sent: Tuesday, March 16, 2010 12:57 PM Subject: Re: [Emc-users] Jog under PAUSE / tool cnange
> Alex Joni pravi: >> http://article.gmane.org/gmane.linux.distributions.emc.user/17898/match= >> >> > .. Just little different name but I got it. > Just can't run it. I get error and can't proceed. Seems that NML_FILE > cause problem. > For now I happily run my cnc without NML_FILE. When I change I got error > and here is error log: you need a line like: NML_FILE = emc.nml > So I try to setup some NML_FILE. As I don't have clue what here should > be (manual explain that in one line ?!? -nothing-) I just run stepconf > and I get emc.nml file. The problem is that with this file assigned I'm > can't run machine any more. Here is log of attempt to run machine with > old toolchanger routine and NML_FILE = emc.nml assigned in inifile. > that seems like you have an old nml file. for 2.5.0~pre (which you are running) you need the nml file to be like this: http://git.linuxcnc.org/gitweb?p=emc2.git;a=blob;f=configs/common/emc.nml;h=3b3d72b0f9087cb044be3c6e9bf6e20f47721328;hb=HEAD in your checkout it should be included in emc2-dev/configs/common/emc.nml regards, Alex ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
