I have had exactly the same experience as Gene. I was using the Oword code for making multiple parts (Xmas ornaments) this past winter. When I use the touchoff to set the X then Y then Z workpiece origins, I had to go through three reloads. By the time I set the Z, I was experiencing several minutes of busy computer. If I had to reset any of the axis' then the reset time would easily take 15 minutes.
I do not have the details of my system ready at the moment On Sat, Apr 3, 2010 at 11:16 AM, Dave Caroline <dave.thearchiv...@gmail.com>wrote: > 384meg is a bit on the low side, open a terminal and type > top > look at %wa should be 0 if its a high percentage its probably using > swap memory...and that is a speed killer > > Dave Caroline > > > ------------------------------------------------------------------------------ > Download Intel® Parallel Studio Eval > Try the new software tools for yourself. Speed compiling, find bugs > proactively, and fine-tune applications for parallel performance. > See why Intel Parallel Studio got high marks during beta. > http://p.sf.net/sfu/intel-sw-dev > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
