Alex Joni pravi: >> I just wonder why every time I post something here got feedback (that's >> not good, just use this and .., you don't need that.. etc etc...) and >> near none gave solution? >> > > You asked for a way to test your axis, and got 3 solutions: >
Maybe that is the problem. I didn't ask for solution. (My english is not so good so maybe I ask by mystake.) I propose solution. The software solution to just show message with home difference when homing is done. (just need something like "in basic" Print "X offset ",current_machine_position - machine_home_position just before setting home position before after homing axis. (of course for each axis when homed) > * use a dial indicator > Not good. The error is to rare > * use the home switch for probing > How to do that if home is limit too? > * mark the coupler and watch the position change > That's work. The problem all thing is under bellow and it's not practical. > If you don't like any of the solutions, then I don't see why anyone is to > blame. > > I don't want to blame anyone. >> Seem's that I'm not alone. The Bernhard Kubicek write nice filter option >> and was included in git and working few days after that was cripled and >> doesn't work any more. The problem is posted but noone wan't to correct. >> > > I am not sure of what issue you are talking about, also not about where it > is posted. > Bugreports get reported here, where I couldn't find anything: > http://sourceforge.net/tracker/?group_id=6744&atid=106744 > As I remember it's posted on linuxcnc forum and emc-developers group. And when I do git pull I got that filter menu to work. few day's lather the filter menu dissapear. bkubicek provided zip.file as response all is on the linux cnc forum. *http://tinyurl.com/y9u5yoh *After patch then menu again works but next git pull kill that. > If you want to help resolving such an issue, it really helps to provide > further information (then it gets sorted faster): > * when the original patch was added, > * when it stopped working, > * a patch that fixes the issue (either patch or a pull address from your > repo where it's fixed). > It's all posted at *http://tinyurl.com/y9u5yoh *Seem's bad idea to have two locations for that. I like forum but the response is low. > For developing related things the devel mailing list is probably more > appropriate. > > Best regards, > Alex > I like EMC2 but has filling that 'developers' send's homemade machine's and hobby operator in background with their wishes. I just can't bet it why the targeting big commercial machines with GPL software more than hobby one? em I missing something?!? Slavko ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
