Hi Dave, The spindle is 10Kw, roughly 12-13 HP. Spindle is equipped with a disk brake for quick stops. Max spindle speed is 4000 RPM.
I am pretty sure that the input transformer is strappable for 230/460. Likely 460 now. Turret tooling: upper XZ turret accepts 8 each 3/4" square shank turning holders directly have 4 bolt on round bushing/boring bar holders have 3 or more large boring bars that directly fit holders have 14 assorted round bushings, these also fit lower turret, I think have 1 drill chuck that fits either turret have 2 bolt on holders for square shank tooling parallel to Z axis lower turret has some tooling in it, but I will have to look to see what Each turret holds 8 tools. There is provision for coolant through the turret to the tool holder for local aimed coolant. The machine is equipped with a chip conveyer and parts catcher. The collet closer has adjustable force and can pull or push. Cheers, Steve > -----Original Message----- > From: Dave [mailto:e...@dc9.tzo.com] > Sent: Friday, May 07, 2010 9:06 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] anyone interested in a Hardinge > SuperSlant lathe as a conversion project? > > Hi Steve, > > You were smart in getting all the parts you can. > > What size spindle motor is on your lathe? Is that a 10 hp unit. > > Do you happen to know the spindle rpm range? > > Is that wired for 480 or 230 3 phase? > > I would not scrap that lathe... I think you can sell it > considering the price range you are in. > > How many turret tool holders do you have roughly? > > Dave > > > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
