> No, but that might be a reasonable place to start. What I was saying > was that a simple override on the abrasive and water does not need > ClassicLadder, that can be done trivially in HAL. > > >> In that case - creating additional pyvcp panel with those buttons will >> return to the previously asked, but not answered question - is it >> possible to insert pyvcp panel on the left side of the screen, right >> under "spindle" and "flood" section >> > Yes, it is possible. But everything is possible when you have the > source code. I don't think that with the standad code the pyVCP can be > anywhere other than the right. > However, I think you might be able to omit the coolant and spindle > pins from the standard HAL file so that the buttons do not appear on > the left, and then add buttons with the same functions to a PyVCP on > the right. I _think_ but have not checked that you can still access > the M3 etc signals through HALUI and direct them to the requisite pins > in HAL > >
Something else to consider ... you can make the PyVCP panel a stand alone window. I believe there is a sample config that has that setup. Dave ------------------------------------------------------------------------------ ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
