I have not changed the jumpers on the board that I believe by default are set for 1/8 microsteps
Shaffin. On 06/14/2010 07:53 PM, Ries van Twisk wrote: > You are sure you don't have 10 times micro-stepping? > > just a guess... > Ries > > > On Jun 14, 2010, at 6:47 PM, Shaffin Bhanji wrote: > > >> Hello, >> >> I need some serious help getting either my math incorrect or my >> configuration. I am using the step-configuration wizard to setup my >> Xylotex 3-axis cnc platform. I have a 420oz. >> >> I am having a problem setting up my 3 axis. The configuration that I >> am >> using is: >> >> Steps per revolution = 200 >> Driver microstepping = 2 >> Pulley ratio = 1:1 >> Lead screw pitch = 10 (using a 1/2-10tpi) >> >> When I run the test to travel the length of 5inches, the axis only >> travel about 1 inch and not the full 5 inches. I know I am doing >> something stupid here. Need help with configuration here. >> >> Shaffin. >> >> >> ------------------------------------------------------------------------------ >> ThinkGeek and WIRED's GeekDad team up for the Ultimate >> GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the >> lucky parental unit. See the prize list and enter to win: >> http://p.sf.net/sfu/thinkgeek-promo >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ > ThinkGeek and WIRED's GeekDad team up for the Ultimate > GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the > lucky parental unit. See the prize list and enter to win: > http://p.sf.net/sfu/thinkgeek-promo > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
