Hi Stuart, If it is permissible to offer a Windows based solution I would suggest EasyCAD. It really is a very easy to use 2D drafting program that I have used for years for mechanical drawings, electrical schematics, etc. Low cost ($295.00) and very good support. If I was sitting next to you showing you how to use it you would be reasonably proficient in 15 - 30 minutes. Without help it might take you 45 - 60 minutes to be up and running. It really is easy. Here is the link: http://www.fastcad.com/infoec7.php. Like most programs a free demo is available for download.
My thanks to the replies that provided the Linux based options. I am interested in trying them and comparing them to the Windows based products I currently use. Have a good day, Jim -----Original Message----- From: Stuart Stevenson [mailto:[email protected]] Sent: Thursday, July 22, 2010 11:57 AM To: EMC2-Users-List Subject: [Emc-users] schematics Gentlemen, I would like to find software to create/document schematics for my machines. I would like to have symbols and features to place where needed. Is there anything out there? Sorry if this has been addressed before. Free is good but it doesn't have to be free - just not many thousands of dollars. thanks Stuart -- dos centavos ---------------------------------------------------------------------------- -- This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
