happen to have any sketches or drawings of a cutaway view? I think that would help us understand just what's going on inside.
On Fri, Jul 30, 2010 at 9:17 AM, Andy Pugh <[email protected]>wrote: > On 30 July 2010 12:31, Erik Christiansen <[email protected]> wrote: > > > Unfortunately I don't have working audio on either computer, so I don't > > know if there are any hints on whether the nipple in the back of the > > INT30 holder rotates in the grabber, or somehow compressed air gets into > > a rotating actuator? > > There is no audio other than the sound of compressed air. > > The drawbar and release cylinder are completely separate, and actually > have a few mm of clearance between each other most of the time. > The drawbar consists of the gripper fingers, the outer tube and a > stack of belville washers that all sit inside the spindle in the place > of the normal drawbar. This rotates with the spindle. > On top is the release cylinder, that pushes down on the central rod of > the drawbar whilst simultaneously pulling up on a collar screwed onto > the outer tube. This is stationary. > > Engaging the release while the spindle was spinning would be bad. > > -- > atp > > > ------------------------------------------------------------------------------ > The Palm PDK Hot Apps Program offers developers who use the > Plug-In Development Kit to bring their C/C++ apps to Palm for a share > of $1 Million in cash or HP Products. Visit us here for more details: > http://p.sf.net/sfu/dev2dev-palm > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details: http://p.sf.net/sfu/dev2dev-palm _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
