thanks guys, I am running the script now. Been reading about G code on the plane.
i On Fri, Aug 6, 2010 at 11:49 AM, Kirk Wallace <[email protected]> wrote: > On Fri, 2010-08-06 at 11:28 -0500, Igor Chudov wrote: >> I would like to debug my G codes while away from my Bridgeport >> Interact mill. To that end, I would like to use EMC as a G code >> previewer, without needing any realtime features, ppmc driver etc. >> >> How can I install it on an existing 10.04 computer? >> >> thanks >> >> i > > This _might_ help (see section 2.6), but installing EMC2 on 10.4 is > still experimental: > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2 > > > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/index.html > California, USA > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by > > Make an app they can't live without > Enter the BlackBerry Developer Challenge > http://p.sf.net/sfu/RIM-dev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
