Thanks Chris and Yann; I scoured the documents and came up with the attached list. If you see any errors please let me know. If you think it is worth anything to anyone else, post it wherever.
Thanks again
Don
On Fri, Aug 13, 2010 at 11:36 PM, Chris Radek <ch...@timeguy.com> wrote:
>
> If you search for the word parameter in
>
> http://linuxcnc.org/docs/2.4/html/gcode_main.html
>
> you'll find a lot more, including at least the two reference points,
> probe results, and M66 input. There are also 5400...5413 which are
> information about the current tool, but I don't see that on this
> page.
>
> That's all of them I can think of...
>
> > Also is there a group available for use in the G Code, unused by EMC?
>
> Variables #1 through #5000 are completely safe to use, but remember #1
> through #30 are subroutine-local (described in section 3.1)
>
> Chris
>
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by
>
> Make an app they can't live without
> Enter the BlackBerry Developer Challenge
> http://p.sf.net/sfu/RIM-dev2dev
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
EMC Numbered Parameters.list
Description: Binary data
------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
