Jon Elson wrote: > > Right, so at least with EMC2, the spindle is not a named axis, as the > only command > it will follow is speed (S) and direction (M02, M04). > That should be M03, M04.
Jon ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users