On Tue, Sep 7, 2010 at 10:27 AM, Stuart Stevenson <stus...@gmail.com> wrote: > you can use the measured tool length as the number in the tool table > you will need to set your z zero to use the measured tool length
Stuart, do you mean that I have to set my zero by "touch off"? So say I touch off with one tool from tool table, then switch tool to my desired cutting tool, and the cutting tool would automagically be adjusted vertically to compensate for difference in offsets between the cutting tool and the tool I used to touch off Z. Right? Just tryin' to be clear. Thanks1 i ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
