so i can also use this as an emergency stop? 2010/9/29 dambacher-retrofit.de <i...@dambacher-retrofit.de>: > Am 29.09.2010 17:14, schrieb Peter Teurlings: >> Thanks a lot, >> I see that you connected all the RF an JF together. >> is this so everything get's enabled? >> I just put a single pulse on it at startup so everything gets enabled? > > I have the full wiring of this. > No you need a steady 24V signal to enable. The controller will stop > immediately > if the signal is 0V on RF or on the JF+/- direction you are moving. > > /ulf > > ------------------------------------------------------------------------------ > Start uncovering the many advantages of virtual appliances > and start using them to simplify application deployment and > accelerate your shift to cloud computing. > http://p.sf.net/sfu/novell-sfdev2dev > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users >
-- Met vriendelijke groet, Peter Teurlings peerkedemul...@gmail.com ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
