Am 02.10.2010 13:24, schrieb Peter Teurlings: > Could you email me the full wiring? > that would come in handy for my wiring. > > Do you know of any good software to draw wiring diagrams? > > Hi Peter
Can you give me a Hint on what you need in detail? The full wiring plan of the mh700 is 40pages, the full wiring of the 2trm3 is DIN-A0, a puzzle of 16 pages. And the pinouts I sent you an excerpt of this. And that's the original wirings, not my retrofit. I have not yet done a clean rewrite of my hand-written wiring plan. But as a staring point: I removed the original philips breakout board and wired all outputs to my motenc. I used some finder relais to copy the original wiring of the gearbox motors. The gearbox logic consists of a glue module with a table showing gearbox settings for given spindle speeds and a classicladder logic for actually switching the gears. Software: I use eagle (http://www.cadsoft.de/). Cheap and works for platines, wiring diagrams and other things. bye Ulf -- --------------------------------------- Dr.-Ing. Ulf Dambacher Ingenieurbüro für Maschinenbau Ihr Experte für * Retrofit * Funktionserweiterung * Fehlerbeseitigung * Wartung bei Werkzeugmaschinen in Gebrauch Riedweidenstr. 9 79331 Köndringen Tel.+Fax: 07641 9379858 Mobil: 0170 9560075 www.dambacher-retrofit.de i...@dambacher-retrofit.de --------------------------------------- ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
