omg, real numbers? Totally glossed over that, I will have to examine my .ini and gcode and figure it all out...
Thank you!!! ________________________________ From: Gene Heskett <[email protected]> To: [email protected] Sent: Fri, October 15, 2010 12:02:42 PM Subject: Re: [Emc-users] joint limits On Friday, October 15, 2010 02:59:09 pm Rudy Munguia did opine: > Hello again, > > My previous issue with proc's is still present, however at this point I > am confident that I am just not getting my post processor syntax > correct. It keeps putting the subroutines after the program, instead of > loading subs first. > > However, I need to get a run of parts out this weekend, so I have > re-configured everything to spit out plain code. > > But I have run into an issue that is a little less obvious to me. The > current part ranges from -.5 to 1.5 in the y axis, the limits of my y > axis are -1.5 to 3.5, EMC2 is reporting that line 12 linear movement > would exceed joint 2 positive limit. Line 12 is positioning for a > profile starting at x.5 y1.0. Google is not presenting a clear example > of this issue and resolution. > > This not an exotic machine, just a standard taig right now. Ironically > the parts are enclosures and mounts for limit switches. > Yes, but since emc uses base 0 numbering, joint 2 is your Z axis I believe, joint 0 being X, joint 1 being Y etc, at least in my setup. And yes, Murphy is alive and well and is determined to foul up the limits hardware. ;-) > > ------------------------------------------------------------------------ > ------ Download new Adobe(R) Flash(R) Builder(TM) 4 > The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly > Flex(R) Builder(TM)) enable the development of rich applications that > run across multiple browsers and platforms. Download your free trials > today! http://p.sf.net/sfu/adobe-dev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) The human race never solves any of its problems. It merely outlives them. -- David Gerrold ------------------------------------------------------------------------------ Download new Adobe(R) Flash(R) Builder(TM) 4 The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly Flex(R) Builder(TM)) enable the development of rich applications that run across multiple browsers and platforms. Download your free trials today! http://p.sf.net/sfu/adobe-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Download new Adobe(R) Flash(R) Builder(TM) 4 The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly Flex(R) Builder(TM)) enable the development of rich applications that run across multiple browsers and platforms. Download your free trials today! http://p.sf.net/sfu/adobe-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
