Hi Richard;
I am not familiar with stepconfig therefore not understanding what is
happening.
If you are attempting to home and stay at the + end if travel, the HOME=0.0
will
override a HOME_OFFSET= setting. If that is what is happening remove the
HOME=0.0 and it will finish the home where you are programing it to.
Hope this helps
Don
On Mon, Jan 3, 2011 at 8:03 PM, <[email protected]> wrote:
> I used stepconf to setup my Fireball V90
> The only hitch was to invert the x direction
> Now I added two limit switches, one at each end of the x axis
> I configured pin 10 as x axis home and limit
> The only problem is it homes in the wrong direction
> If I once again use stepconf and uncheck the box to invert the x direction
> it homes properly
>
> [AXIS_0]
> TYPE = LINEAR
> HOME = 0.0
> MAX_VELOCITY = 3.3
> MAX_ACCELERATION = 10.0
> STEPGEN_MAXACCEL = 12.5
> SCALE = 8000.0
> FERROR = 0.05
> MIN_FERROR = 0.01
> MIN_LIMIT = -0.01
> MAX_LIMIT = 18.0
> HOME_OFFSET = 0.000000
> HOME_SEARCH_VEL = 1.500000
> HOME_LATCH_VEL = 0.062500
> HOME_IGNORE_LIMITS = YES
>
> Thanks for any suggestions
>
> Richard
>
>
> ------------------------------------------------------------------------------
> Learn how Oracle Real Application Clusters (RAC) One Node allows customers
> to consolidate database storage, standardize their database environment,
> and,
> should the need arise, upgrade to a full multi-node Oracle RAC database
> without downtime or disruption
> http://p.sf.net/sfu/oracle-sfdevnl
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
------------------------------------------------------------------------------
Learn how Oracle Real Application Clusters (RAC) One Node allows customers
to consolidate database storage, standardize their database environment, and,
should the need arise, upgrade to a full multi-node Oracle RAC database
without downtime or disruption
http://p.sf.net/sfu/oracle-sfdevnl
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
