On Wed, 2011-03-09 at 11:12 -0600, Jon Elson wrote: > Kirk Wallace wrote: > > > > It might be hard to find a VFD rated higher than a few HP that can run > > on 240VAC input. > > http://www.automationdirect.com/adc/Overview/Catalog/Drives/GS2_%28115_-z-_230_-z-_460_-z-_575_VAC_V-z-Hz_Control%29 > > > > Short URL: http://alturl.com/qhdpo > > > > > I am running an 11 KW Toshiba VFD on 240 single-phase, and it is > perfectly happy. A few models have phase loss > detection, and will fault if they don't have all three phases. Most
I was just going by the data on the GS2 datasheet, and AssUMeing that their product line would be typical. With a little more insight I now realize my assumption is wrong. My bad. I'm really not very good beyond 3 HP. I'm looking forward to see how this story ends. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Colocation vs. Managed Hosting A question and answer guide to determining the best fit for your organization - today and in the future. http://p.sf.net/sfu/internap-sfd2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
