On Thu, 25 Aug 2011, Jon Elson wrote:
Date: Thu, 25 Aug 2011 12:34:23 -0500
From: Jon Elson <[email protected]>
Reply-To: "Enhanced Machine Controller (EMC)"
<[email protected]>
To: "Enhanced Machine Controller (EMC)" <[email protected]>
Subject: Re: [Emc-users] D510 EPP problem
Viesturs L??cis wrote:
Hello, gentlemen!
I am having difficulties with getting Mesa 7i43 card working on D510 board.
Well, I know that one of my interface boards needed a firmware change to
work with the D510MO. I needed
to change the filtering of some signals on the parallel port interface
for it to work with that
motherboard.
If Mesa has not tested the 7i43 with the D510MO, then there is no way to
be sure it will work.
Jon
We've had customers using the D510 with the 7I43 with no problems (other than
the BIOS error in mode reporting) So I dont think its anything we need to do
with the 7I43, its EPP timing is very conservative and has not been changed
since the very first shipped devices.
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
EMC VNX: the world's simplest storage, starting under $10K
The only unified storage solution that offers unified management
Up to 160% more powerful than alternatives and 25% more efficient.
Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
