On Thu, 2011-08-25 at 12:00 -0700, Peter C. Wallace wrote: ... snip > Dont know Kirks util but extended address should probably be the base address > + 0x400 or 0x402 so 0x778 or perhaps 0x77A ... snip
I found a few cards with extended registers where they were not "supposed" to be, so i made the utility base and extended address command options independent. I had to use different commands (lspci -v, dmesg), datasheets or grope-in-the dark to find register addresses. Someone that knows a thing or two might have a better method. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
