>
> This gives me in the Axis display to buttons to
> turn the spindle on and off. When pressing the two
> buttons with the left mouse button or F9 the pin
> 14 followes the state of the buttons of the
> display, maening going high and low. When trying
> to turn the spindle on with M3 or M4, from the MDI
> console or from a G-Code file, the buttons follow
> the commands (M3 / M4) but not the pin 14. When I
> manualy turn the spindel on with the mouse or F9,
> the command M5 turns the spindel off and pin 14
> goes low representing the state of the buttons.
>
> What did I wrong?
>
> Any help would be higly appreciated.
>
Its a quirk of EMC. Try setting a spindle speed.
eg s1 before setting m3 or m4 (AXIS does this internally)
Chris M
------------------------------------------------------------------------------
Special Offer -- Download ArcSight Logger for FREE!
Finally, a world-class log management solution at an even better
price-free! And you'll get a free "Love Thy Logs" t-shirt when you
download Logger. Secure your free ArcSight Logger TODAY!
http://p.sf.net/sfu/arcsisghtdev2dev
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
