HI Andy, I found the problem. I must have reviewed it a 1000 times, but I had a typo in the name.... All is working fine now. Thanks for the help
Brian On Wed, Sep 7, 2011 at 3:19 PM, andy pugh <[email protected]> wrote: > On 7 September 2011 21:56, Brian May <[email protected]> wrote: > > Maybe im using the wrong command because i tried it in the postgui > > > > I am using setp spindle-vfd.nameplate-RPM 1760 > > That's a funny looking pin/signal name. Can you pastebin the HAL files? > > -- > atp > "Torque wrenches are for the obedience of fools and the guidance of wise > men" > > > ------------------------------------------------------------------------------ > Using storage to extend the benefits of virtualization and iSCSI > Virtualization increases hardware utilization and delivers a new level of > agility. Learn what those decisions are and how to modernize your storage > and backup environments for virtualization. > http://www.accelacomm.com/jaw/sfnl/114/51434361/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Brian May 506.8862.9162 (Cell) 506.2293.6375 (Office) ------------------------------------------------------------------------------ Using storage to extend the benefits of virtualization and iSCSI Virtualization increases hardware utilization and delivers a new level of agility. Learn what those decisions are and how to modernize your storage and backup environments for virtualization. http://www.accelacomm.com/jaw/sfnl/114/51434361/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
