On 09/30/2011 07:42 AM, John Thornton wrote: > I'm going to assume you upgraded from 2.3 to 2.4 in the process but > didn't follow the instructions on this page for upgrading... > > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?UPDATING > > John > > On 9/29/2011 10:26 PM, marc foster wrote: > >> I have a recently upgraded to a new PC for my EMC installation and I am >> having difficulty getting EMC to run on the 10.04 Live CD. I know that it >> is not a hardware issue because I can run a 8.04 Live CD and everything >> works fine. The 10.04 CD boots and runs fine, however when I run the EMC it >> crashes with a long string of 'waiting for s.axes' errors. When I launch >> the latency test the window comes up but the times are all '0' and do not >> change regardless of computer usage. There appear to be no errors when I >> check dmesg after running Latency_test. I have tried to boot with >> isolcpus=0 as I have found in the forums, however it behaves the same. Any >> ideas? I need to run the 10.04 CD because I would like to have the >> additional software in that distro. >> >> many thanks, >> >> marc >>
He says he is running the Live CD. Shouldn't the ini file be correct for the 10.04 LTS and version of EMC2 that's on it? Unless he's mistaken when he says he's running the Live CD and actually has it installed on the machine. Mark ------------------------------------------------------------------------------ All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-d2dcopy2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
