>After you change the tool table manually, you must invoke File/Reload Tool Table to tell EMC you changed it.
Tried this, it still did not work >Also consider using G10 L1 to change the tool table, which lets you do it in one step. This did work, it is a little annoying I can use Diameter with G10 L1 What is the difference between G0 L1 and G0 L10, I have read the information here http://linuxcnc.org/docs/html/gcode_main.html but this is not entirely clear to me. Thanks much ------------------------------------------------------------------------------ The demand for IT networking professionals continues to grow, and the demand for specialized networking skills is growing even more rapidly. Take a complimentary Learning@Cisco Self-Assessment and learn about Cisco certifications, training, and career opportunities. http://p.sf.net/sfu/cisco-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ The demand for IT networking professionals continues to grow, and the demand for specialized networking skills is growing even more rapidly. Take a complimentary Learning@Cisco Self-Assessment and learn about Cisco certifications, training, and career opportunities. http://p.sf.net/sfu/cisco-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
