On 23 October 2011 14:22, Bruce Klawiter <[email protected]> wrote: > What is the difference between G0 L1 and G0 L10, I have read the information > here http://linuxcnc.org/docs/html/gcode_main.html but this is not entirely > clear to me.
G10 L1 says "This is the length of my tool" G10 L10 says "My tool is at this position in the current coordinate system, set the tool offsets to make that consistent with the axis positions" Or, looked at another way, G10 L1 is equivalent to editing the tool table, G10 L10 is equivalent to using tool touch-off in the GUI. -- atp "Torque wrenches are for the obedience of fools and the guidance of wise men" ------------------------------------------------------------------------------ The demand for IT networking professionals continues to grow, and the demand for specialized networking skills is growing even more rapidly. Take a complimentary Learning@Cisco Self-Assessment and learn about Cisco certifications, training, and career opportunities. http://p.sf.net/sfu/cisco-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
