On Tue, 1 Nov 2011, BRIAN GLACKIN wrote: > I have used 1/4 X 1/8 collet adapters with good success. I cannot recall > the supplier, but they are one of the companies that specializes in > supplies woodworking tools to instrument makers - Stewart perhaps? > > Brian > > On Tue, Nov 1, 2011 at 4:35 PM, <kqt4a...@comcast.net> wrote: > >> I know this has nothing to do with emc but you people represent centuries >> of experience >> How's that for kissing up :) >> I see lots of these 1/2" to 1/4" adapters >> >> http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/router_collet.html >> but what about one for 1/4" router and 1/8" bits >> I have one of the little cheap ones with a set screw but the bit is a >> little loose >> >> Richard
A collet adapter will not help I need the extra length also ------------------------------------------------------------------------------ RSA® Conference 2012 Save $700 by Nov 18 Register now! http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
