No, there is no M code for repeating a program. Here is the short list of M codes in the User Manual.
http://www.linuxcnc.org/docview/html/gcode_main.html#r2 John On 11/3/2011 5:09 PM, Chris Reynolds wrote: > Isn't there an M code for repeating the program? > > > Chris Reynolds > > > Owner - BlowYourBrassOff.com - Maker of fine custom harmonicas > http://www.blowyourbrassoff.com > > > >> Subject: [Emc-users] Repeating a program >> To: "Enhanced Machine Controller (EMC)" >> <[email protected]> >> Message-ID: >> <CAA=YKfMsGct8N=x5w-gcgfe2ecovdir4vxyk9ads6vqcgjb...@mail.gmail.com> >> Content-Type: text/plain; charset=ISO-8859-1 >> >> How do I repeat a program. >> >> On the CNC machines we have now I use an M99 - but this does not seem to >> work in EMC >> >> On my lathe I have a bar puller so I want the program to run over and over. >> >> Thanks >> >> -- >> Brian May > ------------------------------------------------------------------------------ > RSA(R) Conference 2012 > Save $700 by Nov 18 > Register now > http://p.sf.net/sfu/rsa-sfdev2dev1 > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
