On Tue, 2011-11-15 at 10:25 -0500, Steve Stallings wrote: > If I am not mistaken, your mill has a brushless > spindle motor. That would use a different type > of driver than the older X series manual mills > which were typically equipped with brush type > motors. > > Steve Stallings
I think there is a brush holder in this picture: http://www.builderofstuff.com/hf-mill/cnc-5.JPG Chris has a picture of the modification I had in mind: http://timeguy.com/cradek-files/cnc/lathe/DSCN6292.JPG It looks like the C6 will work too. CNC4PC has a couple of schematics relevant to mini-mill controllers: http://cnc4pc.com/Files/EMC2.txt http://cnc4pc.com/Tech_Docs/KBIC.pdf http://cnc4pc.com/Tech_Docs/Sieg_X3.pdf and others at the bottom of: http://www.cnc4pc.com/Store/osc/product_info.php?products_id=58 -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
