2012/2/18 Don Stanley <dstanley1...@gmail.com> > Hi All; > I just assembled my new D525MW computer system. > When I apply power to the system the D525MW powers up > for two seconds then powers down again. > > One of the INTERNET stores selling that computer stated; > they were not reliable for boot up on power up. > > Is anyone having this problem? > > It is kind of a bother to apply power to the system, then > have to open the electronics cabinet and push that funny little button. >
That's what I thought too. > > I tried a jumper across the power switch pens on the > computer board with the same results. > > The power switch seems to be a momentary contact with some > smarts and/or an led built in? > > Any suggestions? > I have D525MW booting on power up for a long time. BIOS Power page parameter "After power failure" is set to <Power On>. I shut down the computer, then turn off the power switch on PSU. Next time I turn it on and the computer starts. BTW you might want to update the BIOS, it fixes many bugs. Andrew ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
