Yes, they are compatible. We run a a 320x with the Mesa 7i43TA card. -Tom On Apr 7, 2012, at 8:29 PM, Jeshua Lacock wrote:
> > On Apr 6, 2012, at 1:38 AM, Viesturs Lācis wrote: > >> That is why I think that 5i25 card would do much better - less >> rewiring (actually You might get away with no rewiring at all) and >> there also is price difference. Plug it straight in pci slot and >> attach Your existing lpt cables to it. The only thing to do is sort >> out the firmware - most probably, You will need to tell Mesa's people, >> which exact pins are stepgen outputs, which pins are encoder inputs >> and they shall arrange the rest - AFAIK the tool for users to >> configure the 5i25 cards is not yet available. > > I emailed Mesa to inquire about purchasing, and it looks like I would want > the firmware set to support the Gecko 540. (that is the only Gecko controller > they list support for). > > I asked if that was compatible with the Gecko 320 and did not hear back from > them before I guess they went home for the weekend. > > So, can anyone tell me if my 320's will be compatible with it set to support > Gecko 540s? > > My guess is they are compatible, but I want to make sure first. Thanks! > > > Best, > > Jeshua Lacock > Founder/Engineer > 3DTOPO Incorporated > <http://3DTOPO.com> > Phone: 208.462.4171 > > > ------------------------------------------------------------------------------ > For Developers, A Lot Can Happen In A Second. > Boundary is the first to Know...and Tell You. > Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! > http://p.sf.net/sfu/Boundary-d2dvs2 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users