And, the ethernet works. Thanks all. On Fri, Apr 13, 2012 at 7:13 PM, Erik Friesen <[email protected]> wrote:
> The dos utility needs msdos, which I found here - > http://www.bootdisk.com/popfiles.htm and had to pay $4. I had to put it > into my windows machine, as my linux won't boot from usb. My windows > machine doesn't have a 1.44, the linux machine won't read its 1.44 in linux. > > > On Fri, Apr 13, 2012 at 2:47 PM, Erik Friesen <[email protected]> wrote: > >> correction ucbd >> >> >> On Fri, Apr 13, 2012 at 2:46 PM, Erik Friesen <[email protected]> wrote: >> >>> Apparently, I am not using a correct os to do this. If I change >>> prob_rfx2 to probrfx2 it starts, but can't finish, gives me an error, >>> 'segment overrun exception', plus the #1 space is corrupt now. usbd >>> freedos 1.44. freedos 1.0 hangs when attempting to write. XP cmd line >>> says operation cannot proceed in virtual machine.(is not installed in a >>> virtual machine) >>> >>> >>> On Fri, Apr 13, 2012 at 1:10 PM, Erik Friesen <[email protected]> wrote: >>> >>>> I am using ubcd, but need more instruction. scmf doesn't want to find >>>> the file, even though I copied the bit file to the same directory. It says >>>> unable to open file. IE SCMF5i25 prob_rfx2 >>>> SCMF5i25 prob_rfx2.bit >>>> >>>> etc.. >>>> >>>> >>>> On Fri, Apr 13, 2012 at 12:23 PM, Erik Friesen <[email protected]> wrote: >>>> >>>>> I'm in a hurry :-). It'll need to be bricked first. >>>>> >>>>> >>>>> On Fri, Apr 13, 2012 at 11:23 AM, Peter C. Wallace >>>>> <[email protected]>wrote: >>>>> >>>>>> On Fri, 13 Apr 2012, Erik Friesen wrote: >>>>>> >>>>>> > Date: Fri, 13 Apr 2012 08:51:26 -0400 >>>>>> > From: Erik Friesen <[email protected]> >>>>>> > Reply-To: "Enhanced Machine Controller (EMC)" >>>>>> > <[email protected]> >>>>>> > To: "Enhanced Machine Controller (EMC)" < >>>>>> [email protected]> >>>>>> > Subject: Re: [Emc-users] 5i25 and ethernet >>>>>> > >>>>>> > Freedos 1.1 doesnt include a livecd. It seems pretty unclear with >>>>>> the >>>>>> > install, I am a little afraid of overwriting my linux install. >>>>>> > >>>>>> > Any suggestions? >>>>>> > >>>>>> >>>>>> If you are in a hurry you could send the card back, otherwise therwe >>>>>> will be a >>>>>> linux configuration tool for the 5I25 fairly soon. >>>>>> >>>>>> >>>>>> > On Thu, Apr 12, 2012 at 8:50 PM, Peter C. Wallace <[email protected]> >>>>>> wrote: >>>>>> > >>>>>> >> On Wed, 11 Apr 2012, Erik Friesen wrote: >>>>>> >> >>>>>> >>> Date: Wed, 11 Apr 2012 16:58:11 -0400 >>>>>> >>> From: Erik Friesen <[email protected]> >>>>>> >>> Reply-To: "Enhanced Machine Controller (EMC)" >>>>>> >>> <[email protected]> >>>>>> >>> To: "Enhanced Machine Controller (EMC)" < >>>>>> [email protected] >>>>>> >>> >>>>>> >>> Subject: [Emc-users] 5i25 and ethernet >>>>>> >>> >>>>>> >>> Any ideas why my ethernet quits working when I plug in the 5i25? >>>>>> >> >>>>>> >> OK found a bug in the PCI core that make the 5I25 not get along >>>>>> well with >>>>>> >> some other PCI cards. Its fixed in the bitfiles in >>>>>> >> >>>>>> >> www.mesanet.com/software/parallel/5i25.zip >>>>>> >> >>>>>> >> (source updated as well) >>>>>> >> >>>>>> >>> >>>>>> >> >>>>>> ------------------------------------------------------------------------------ >>>>>> >>> Better than sec? Nothing is better than sec when it comes to >>>>>> >>> monitoring Big Data applications. Try Boundary one-second >>>>>> >>> resolution app monitoring today. Free. >>>>>> >>> http://p.sf.net/sfu/Boundary-dev2dev >>>>>> >>> _______________________________________________ >>>>>> >>> Emc-users mailing list >>>>>> >>> [email protected] >>>>>> >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>> >>> >>>>>> >> >>>>>> >> Peter Wallace >>>>>> >> Mesa Electronics >>>>>> >> >>>>>> >> (\__/) >>>>>> >> (='.'=) This is Bunny. Copy and paste bunny into your >>>>>> >> (")_(") signature to help him gain world domination. >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> ------------------------------------------------------------------------------ >>>>>> >> For Developers, A Lot Can Happen In A Second. >>>>>> >> Boundary is the first to Know...and Tell You. >>>>>> >> Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! >>>>>> >> http://p.sf.net/sfu/Boundary-d2dvs2 >>>>>> >> _______________________________________________ >>>>>> >> Emc-users mailing list >>>>>> >> [email protected] >>>>>> >> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>> >> >>>>>> > >>>>>> ------------------------------------------------------------------------------ >>>>>> > For Developers, A Lot Can Happen In A Second. >>>>>> > Boundary is the first to Know...and Tell You. >>>>>> > Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! >>>>>> > http://p.sf.net/sfu/Boundary-d2dvs2 >>>>>> > _______________________________________________ >>>>>> > Emc-users mailing list >>>>>> > [email protected] >>>>>> > https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>> > >>>>>> >>>>>> Peter Wallace >>>>>> Mesa Electronics >>>>>> >>>>>> (\__/) >>>>>> (='.'=) This is Bunny. Copy and paste bunny into your >>>>>> (")_(") signature to help him gain world domination. >>>>>> >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> For Developers, A Lot Can Happen In A Second. >>>>>> Boundary is the first to Know...and Tell You. >>>>>> Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! >>>>>> http://p.sf.net/sfu/Boundary-d2dvs2 >>>>>> _______________________________________________ >>>>>> Emc-users mailing list >>>>>> [email protected] >>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>> >>>>> >>>>> >>>> >>> >> > ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
