I'm using the original motors and original amps with good success.

Sent from my iPhone

On Apr 16, 2012, at 8:17 PM, Terry Christophersen <tcninj...@yahoo.com> wrote:

> Hi all,
> I have a Hardinge HNC that I am toying with the idea of retrofitting.I know 
> there is 
> a few on this list that have done so,I would like to know the amp/motor 
> combos that are
> in use.I have one that I put a Centroid on a few years ago but I dont have 
> the workload
> for another 10K kit for this one.I would just use it for a rush job so I dont 
> have to tear down the 
> other HNC.
>  
> I would assume that the origional axis motors would be usable as they were 
> working when I
> shut it off 5yrs ago.Maybe Jon Elsons amps would be a good choice?
>  
> Thanks
>  
> Terry
> 
> ------------------------------------------------------------------------------
> Better than sec? Nothing is better than sec when it comes to
> monitoring Big Data applications. Try Boundary one-second 
> resolution app monitoring today. Free.
> http://p.sf.net/sfu/Boundary-dev2dev
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users

------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second 
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to