On 6/8/2012 11:23 AM, Eric Keller wrote: > On Fri, Jun 8, 2012 at 11:12 AM, dave<[email protected]> wrote: > > >> "Modern Machine Shop" for June (2012) features a hot steel spray >> additive printer. >> > > That's an interesting idea. Flame spray equipment is fairly expensive, > even on ebay. Seems like it would be hard on the motion stage. > Eric > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > >
It would be interesting to see what could be done with a mig welder using fine wire. You would have to play with the current and speed to get the deposition just right. Might get a little expensive in electricity, wire and gas. And you would need a welder that could handle a 100% duty cycle at the current desired. Also, might have to stop every pass or two and let it all cool off. Dave ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
