On Sat, 11 Aug 2012, Viesturs L?cis wrote:
> Date: Sat, 11 Aug 2012 13:33:09 +0300
> From: "[UTF-8] Viesturs L?cis" <viesturs.la...@gmail.com>
> Reply-To: "Enhanced Machine Controller (EMC)"
> <emc-users@lists.sourceforge.net>
> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
> Subject: Re: [Emc-users] 5i23 firmware with 24 stepgens
>
> 2012/8/6 Peter C. Wallace <p...@mesanet.com>:
>>
>> OK, well not quite as simple as I thought because 24 stepgens will not fit in
>> a 400K spartan3 chip, but 18 will: freeby.mesanet.com/5i23st18.bit
>
> LinuxCNC does not like this firmware.
>
> I have:
> D525MW + 2gb ram + 160gb hdd
> Ubuntu 10.04 + LinuxCNC 2.5.0 from liveUSB
>
> hm2_stepper sample config starts up correctly
>
> when I change the firmware to be loaded, I get error message, I think
> that this part from the output is most important (let me know, if You
> want to see full output):
> [ 4785.413236] hm2/hm2_5i23.0: IDROM IOPorts is 3 but MD IOPort
> NumInstances is 4, inconsistent firmware, aborting driver load
OK fixed bitfile at freeby.mesanet.com/5i23st18.bit
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
