On 10/30/2012 08:51 PM, Kirk Wallace wrote: > On Tue, 2012-10-30 at 20:23 -0500, Jon Elson wrote: > ... snip >> But, I'm worried about the missing estop hal pins you mentioned. >> >> Jon > ... snip > > I think the problem is that in order to try a "known" good set of config > files, I used the ppmc configs from LinuxCNC rather than my old lathe > config files. I think the files I used didn't load the estop latch or > similar component, so when LinuxCNC tried to connect the e-stop pins on > loading, it barfed. But, the line you quoted earlier was
ppmc_io.hal:52: Pin 'ppmc.0.din.estop.in' does not exist which is saying a ppmc funtion didn't exist, not the estop latch. > I went through and mapped out all of the connections and settings on > paper, and restored the e-stop system on my lathe and everything is > working fine. I'm also updating all the old newsig's to net's and > cleaning up some of the old hacks to new hacks. OK, well good to hear it is working. Jon ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
