Kent; On 2012-11-04, at 12:27 PM, Kent A. Reed wrote:
>>> >>> My D525MW boards are not beside me ATM, but your correction seems to be >>> about right, IIRC. > > And I thought it was high, but I don't have a D525MW here. > > I don't mean to sound snarky, but have you isolated one cpu? Not snarky; my CNC mill one certainly does have the cpu isolation (thanks for your help back then) my 2nd one just has the LinuxCNC install installed from CD, so I'm just running the latency tests from the pull down menu. I was downloading installing the full Android app development environment at that point in time, so it was something to do while waiting for a server to serve me. ;-) I'll have to go out and run both settings to see if there's a difference, or, more correctly, see what the difference is. Actually, I'm not worried about the figures, as the CNC mill runs just fine (™) as it now stands; the new lathe still needs lots of work before I even contemplate moving this new one downstairs. I just noted someone pointing out the latency numbers and thought that, as I was installing the full Android developer tools on it, that I'd just run the latency test and see what I got. John Alexander Stewart. ------------------------------------------------------------------------------ LogMeIn Central: Instant, anywhere, Remote PC access and management. Stay in control, update software, and manage PCs from one command center Diagnose problems and improve visibility into emerging IT issues Automate, monitor and manage. Do more in less time with Central http://p.sf.net/sfu/logmein12331_d2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
