2012/12/17 dave <[email protected]>: > Hi all, > > There are some complaints on the Intel discussion board about troubles > with 800 MHz memory. Is this common or just a random chance thing. The > experience seems to be that 1333 MHz memory works just fine.
I have never had any trouble with RAM in D525MWs. Probably that could be so, because I might have put 1333 MHz in all of them. I just checked the plasma machine board and at least that has 1333 MHz chip in there. > I know the board is limited to 4GB total memory but can it take all of > that in one slot or am I constrained to 2 x 2GB? I have been using 2GB in single slot and that, combined with no swap partition, has been sufficient for LinuxCNC use. -- Viesturs If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
