On 1 March 2013 03:33, jeremy youngs <jcyoung...@gmail.com> wrote: > i did mean to say will do step gen without the daughter card :) > I really dont want to put a lot in this first gen control as i really > want to go servo, and install ballscrews .
The 5i25 sounds like a decent choice then. If you order it with the G540 firmware then it looks exactly like a parallel port, with the same pinout as the Gecko G540 expects, and can be used with any BoB (or none) with the same pinout. When you later go to servo control you can then flash it with the 7i77 firmware, and hook up the 7i77 analog servo control daughter board. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
