Thank you so much! It's working now, had to add deb http://www.linuxcnc.org/ lucid base linuxcnc2.5 deb-src http://www.linuxcnc.org/ lucid base linuxcnc2.5 to my sources, update and install linuxcnc-dev, nice :)
Now is my home built MDF router that is a little bit skewed in XY "square" again :) Thanks allot again for your help. Regards /Henrik 2013/3/4 Sebastian Kuzminsky <[email protected]> > On 3/4/13 11:27 , Henrik Munktell wrote: > > Hi, thank you for fast answer. > > > > henrik@CNC:~$ cat /etc/apt/sources.list | grep linuxcnc > > henrik@CNC:~$ cat /etc/apt/sources.list.d/linuxcnc-buildbot.list | grep > > linuxcnc > > deb http://buildbot.linuxcnc.org/ lucid master-rt > > deb-src http://buildbot.linuxcnc.org/ lucid master-rt > > > > This should be what is needed, right? > > > > I followed the installation procedure from http://buildbot.linuxcnc.org/ > . > > But I started with a clean 10.04 install, then installed linuxcnc 2.5. > Then > > installed master from buildbot instructions. I don't think you link is > > valid for the master build. > > That's all that's needed if you just want to *run* LinuxCNC. > > If you want to compile external modules (as you do), you need to do a > little more work. The linuxcnc-install.sh script that I linked you to > earlier does that work for you, or you can read the script and do it by > hand. > > http://linuxcnc.org/index.php/english/download/21?task=view > > > -- > Sebastian Kuzminsky > > > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_d2d_feb > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
