Hello Andy. Now the machine is turned on and working but when I have a little time I will try with that configuration.
The program line would be more or less like this right? (movement on X and Y, C is the rotary axis) G2 X0 Y0 C360 I10 J10 F10 P2 Would that give a two turn movement on the rotary axis? Because I need to do several turns, or do I need to offset the rotary axis to zero right after the G2 line and make a loop? Thanks! 2013/3/5 andy pugh <[email protected]> > On 5 March 2013 18:17, Leonardo Marsaglia <[email protected]> > wrote: > > > So what I need to do, is to use G2 or G3 to move the follower showed in > the > > picture following the trajectory of the crankpins combining the two > linear > > axis simultaneously with the rotary axis of the crankshaft. I could > program > > some arcs and I understand the way it works, but the thing is I don't see > > any examples using this with a synchronized rotary axis. > > I tried it in sim/axis/9-axis and it works fine. The movements all > finish at the same time, so are perfectly synched. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_d2d_feb > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- *Leonardo Marsaglia*. ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
