On Fri, Mar 8, 2013 at 12:04 AM, Eric Keller <[email protected]> wrote:
> A typical cnc lathe is limited to round things, so obviously less > generally useful than a CNC, but it's still pretty useful. The cnc in our > shop at work is always going with on-off projects. Today it was making a > test section for some sort of thermodynamics experiment. They had it > boring a 6" diameter chunk of stainless with a 2" hole. Not exactly a fun > job to do by hand, and there is a lot to be said for setting up something > like that and letting it go. > Eric > Sorry, tired, should say: A typical cnc lathe is limited to round things, so obviously less generally useful than a CNC mill, but it's still pretty useful. The cnc lathe in our shop at work" etc ------------------------------------------------------------------------------ Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the endpoint security space. For insight on selecting the right partner to tackle endpoint security challenges, access the full report. http://p.sf.net/sfu/symantec-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
