If you have network issues, you should not run them via a network drive. Copy them to a local directory and then run the files.
Any network problems will prevent ready access to the file and impact the program. Dave On 4/5/2013 9:38 AM, Todd Zuercher wrote: > We have a couple of routers running LinuxCNC and the G-code files are stored > on a network drive. We normally load them and run directly from the network. > Yesterday we were haveing some problems with the network going up and down > for short periods of time (I need to ask the IT guy what the problem was, if > he even knows) . For some reason this caused linuxcnc to freeze up mid run > but set no alarm messages. Any ideas? > > ------------------------------------------------------------------------------ Minimize network downtime and maximize team effectiveness. Reduce network management and security costs.Learn how to hire the most talented Cisco Certified professionals. Visit the Employer Resources Portal http://www.cisco.com/web/learning/employer_resources/index.html _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
