Dave, thank you for Gigabyte mini-ITX GA-E350N. It is a good candidate. How about micro-ATX?
Now I am thinking of ability to put some MESA PCI card to MB. As I understand, this is not possible with GA-E350N? Is it possible to add second PCI-E parport and run it with MESA EPP card? Marius On 2013.04.08 20:59, Dave wrote: > From March 30th by Christopher Purcell posted this note below: > > I have been partial to the Intel D525MW and the D525MWE but the E350N > board should be much faster than the D525 boards. The Intel board was > discontinued last fall but they still keep making them regardless. > the newer Intel MITX boards has a video chip (3650?) that is very > unfriendly with Linux. Intel really screwed up on their latest set of > MITX boards. > > I have abandoned conventional rotating drives for LinuxCNC apps since > the required drive space is very small and SSDs in the 80 Gig range are > under $100 now. > > Intel has one SSD that has a mean time between failure rating of over > 100 years. So the CNC machines I do now might outlive me! ;-) > > I had been getting about 3 years of continuous use out of a rotating > drive before it began to malfunction. > > I need to order some parts from Newegg this week and a E350N board will > be part of the order. > > Dave > ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
