no experience with this but when doing my studies i found several bits of bad p.r for the tb6560 driver . maybe others with experience with them can chime in. also as an integrated driver if one section goes bad you are repaing the whole board or replacing it . with discreet drives you keep an extra around and if one bellies up you swap 7 wires and get back to business . but considering the application i dont think you will be taxing the fortitude of the system and most concerns if iirc were when maxing the voltage to the drives . And last thats all i know about that :)
On Fri, Apr 12, 2013 at 10:42 PM, Gregg Eshelman <g_ala...@yahoo.com> wrote: > Driver board, 4 motors and power supply. DB25 for parallel port, looks > like a DE9 for limit switches and e-stop, third connector for manual > control unit. > > http://www.ebay.com/itm/200592694416 > > Going to do the cable drive on the pattern follower torch, need something > that'll work with LinuxCNC. After spending the big $ on the Dragon-Cut with > Mach3 for the plasma table... Time to save some coin on this torch project. > > Also need to find out how to setup LinuxCNC for a 4 axis cable drive. May > as well go with 4 to ensure the torch position is always solidly controlled > instead of depending on weights or springs to keep it tight. > > > ------------------------------------------------------------------------------ > Precog is a next-generation analytics platform capable of advanced > analytics on semi-structured data. The platform includes APIs for building > apps and a phenomenal toolset for data science. Developers can use > our toolset for easy data analysis & visualization. Get a free account! > http://www2.precog.com/precogplatform/slashdotnewsletter > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- jeremy youngs ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
